Logo
It is currently Sat Aug 18, 2018 8:13 am

All times are UTC + 1 hour




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
PostPosted: Thu Feb 01, 2018 8:10 pm 
Offline
Site Admin

Joined: Thu Jun 11, 2009 10:05 am
Posts: 3327
Location: Amsterdam
Hi all,

No one can explain this better than the author, so, here the previous message from Orac1000 (John Hill):
-----------
For anyone that wants to use the Lambretta Li wheels (which are available in aluminium alloy as well as steel) I have produced a fully dimensioned drawing of the (4mm alloy) division plate you will need. If you are able to print onto A3 it is to scale so you can use it as a template to get all the 11 holes in the right place. The centre hole on A Rumi wheel measures 142.9mm but 143mm would be better to avoid problems.

I have also measured the 10 inch Lambretta LD conversion wheels to see how well they fit on a Rumi. The centre hole seems ok but the 3 fixing holes are on a pcd that is 2mm bigger than it should be for a Rumi. This means you have the file the 3 stud holes 1mm towards the wheel centre or it wont fit properly on the studs. Apart from that they make a good replacement.

-----------

Below you can see an image of the drawing, this is just a miniature example, to download the ZIP file with the high resolution files, please click at the blue link below. Inside you will find two files, one PDF and one dwg (autocad)

Thanks John for sharing this with us! :D

Attachment:
Moto_Rumi_wheel_10'_division_plate_Diagram_by_Orac1000.zip

Attachment:
Moto_Rumi_wheel_10'_division_plate_Diagram_Miniature_example.jpg


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

_________________
My little Formichino here: http://www.formichino.com/pictures1.html


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © || Graphic Design by hugomez